Reinforce the connection between the rafters and the tie plate with steel hurricane ties. Then complete the roof frame by including the two×6 subfascia and building the side and end overhangs. Match the overhangs to the overhangs on the garage. For the best look, match the slopes of the addition and garage roofs. In Photo eight, we present a easy methodology of marking a 2×6 to use as a guide for making a sample rafter.
Cut the two×10 headers to this size and nail them together with 10d nails. Nail a 2×4 to the bottom of the 2x10s to complete the header .
Before you start, be sure to’ve checked to see what that distance is and that your plans adhere to it. The value of a allow actually is determined by your metropolis and the borough you reside in.
Start by finding the middle of your addition and marking the scale of the opening on the underside plate of the wall. We centered the bump-out on the garage wall, however this isn’t needed. past the opening marks on both sides to locate the within fringe of the king studs. Cut king studs and nail them to the top and backside plates. For a 12-ft.-broad addition, the space between the king studs must be 11 ft. 11 in.
If you’ve vinyl, aluminum or metal siding, it’s in all probability easier to remove it from the entire storage wall and reinstall it after the addition is built. beyond the width of … Read More